1. Introduction, Setting

1-9

Is it possible to change the SNMP Trap port (162/UDP) used for sending alert information from the NetSkateKoban Sensor to the NetSkateKoban Manager?

It can be changed by applying the following settings.

(1) On the NetSkateKoban Sensor side
    In the "NetSkateKoban Sensor Configuration" screen of the web management UI, set the desired port number in the "SNMP Trap Port" field under "MonitoringInterFace (eth0)".

(2) On the NetSkateKoban Manager side
    File name: config\ports.conf
    Change the value of "TRAP_RECEPTION_PORT" to the port number configured in step (1).