1. Introduction, Setting

1-10

Is it possible to change the port (9907/TCP) used for send block commands from the NetSkateKoban Manager to the NetSkateKoban Sensor?

It can be changed by applying the following settings.

(1) On the NetSkateKoban Sensor side
    In the "NetSkateKoban Sensor Configuration" screen of the web management UI, set the desired port number in the "Port" field under "ARP Poisoning Agent Configuration".

(2) On the NetSkateKoban Manager side
    File name: config\ports.conf
    Change the value of "ARPAGENT_RMI_PORT" to the port number configured in step (1).