Language
NSK.ico

NetSkateKoban Enterprise FAQ

Advanced Search

Category

FAQ Number

Q

A

Items Per Page
FAQ Number Q Category
1-32 Is it possible to monitor a device connected to a port on an Ethernet switch where multiple VLAN IDs are assigned to that single port, or where the VLAN IDs assigned to the port change automatically? 1. Introduction, Setting
1-33 [Koban Sensor] We are operating multiple IP networks on a single Ethernet segment. In such an environment, is it possible to monitor each IP network independently? 1. Introduction, Setting
1-35 [Koban Sensor] We are operating multiple IP networks on a single Ethernet segment. After connecting a single 1‑I/F sensor to this network, it was able to detect devices from all IP subnets. Are there any operational issues with this setup? 1. Introduction, Setting
1-37 Please tell me about Linux distributions with a proven track record. 1. Introduction, Setting
1-38 We are using the Dynamic ARP Inspection (DAI) feature on Cisco Catalyst switches. Are there any precautions we should take when connecting the Koban sensor? 1. Introduction, Setting
1-39 We are using the Automatic Broadcast Control (ABC) feature on HP ProCurve switches. Are there any precautions we should be aware of when using the Koban sensor? 1. Introduction, Setting
1-41 We are using the NetSkateKoban Manager Appliance. Is it possible to use "External Commands" in the policy settings? 1. Introduction, Setting
1-42 Please tell me which router products are compatible with the RtrMon Monitor. 1. Introduction, Setting
1-44 Please tell me the points to be noted when installing the Web Console / Web Application System on RedHat Linux or CentOS. 1. Introduction, Setting
1-45 Is it possible to install and monitor the NetSkateKoban sensor in a segment that is separated by NAT (Network Address Translation)? 1. Introduction, Setting
1-46 How should "Network" be registered on a monitoring interface that monitors an Ethernet segment operating multiple IP networks? 1. Introduction, Setting
1-47 When replacing a sensor unit, how can I migrate the configuration from the existing sensor to the new one? 1. Introduction, Setting
1-48 Why am I receiving many "Unregistered Sensor" notifications even though the sensor is already registered? 1. Introduction, Setting
1-6 If a device is running an operating system that is not supported by NetSkateKoban, does that mean it cannot perform network connection monitoring and management with NetSkateKoban? 1. Introduction, Setting
1-7 Is one NetSkateKoban sensor required per network segment? 1. Introduction, Setting
1-8 I would like to configure the firewall, so please tell me the communication port numbers used between the NetSkateKoban Console, Manager, Sensor, and DB Server. 1. Introduction, Setting
1-9 Is it possible to change the SNMP Trap port (162/UDP) used for sending alert information from the NetSkateKoban Sensor to the NetSkateKoban Manager? 1. Introduction, Setting
2-1 Is it possible to detect unauthorized connections even in a DHCP environment? 2. Function, Operation
2-11 Is it possible to use the SwiMon module in an environment where multiple switches are connected in a cascade? 2. Function, Operation
2-12 Is it possible to block Windows file sharing (NetBEUI), which does not use IP addresses? 2. Function, Operation