| 2-39 |
If the IP address of the target device being blocked changes during communication blocking, what happens to the communication blocking? |
2. Function, Operation
|
| 1-15 |
If we use Microsoft SQL Server with a server licensing model (not a processor licensing model) as the database server, how many Client Access Licenses (CALs) will be required? |
1. Introduction, Setting
|
| 4-27 |
In environments using L3 switches, an unexpectedly large amount of terminal connection history data is recorded compared to the number of terminals being monitored. |
4. Troubleshooting
|
| 1-26 |
In monitoring using SwiMon, where should the SNMP information of the default gateway—registered for obtaining IP address information—be configured? |
1. Introduction, Setting
|
| 4-24 |
In segments monitored by NetSkateKoban Sensor, there are terminals that rarely appear on the map even though they are connected to the network. |
4. Troubleshooting
|
| 3-14 |
In SwiMon terminal monitoring, if a terminal's IP address is initially obtained from the default gateway but that information can no longer be retrieved from the default gateway, how is the terminal's IP address information recorded and displayed? |
3. Technical information
|
| 2-24 |
In the "Current Map" overview display, devices that have been connected to multiple network segments are shown. |
2. Function, Operation
|
| 3-22 |
In the "Detected Terminal List" of the Koban browser, there are some terminals for which the "Terminal Name" information is not displayed. |
3. Technical information
|
| 1-19 |
In the hierarchical display of location information using a tree structure, I would like to specify the order in which locations are shown. Is there any recommended method for doing this? |
1. Introduction, Setting
|
| 2-57 |
In the Koban Browser, what are the "Edit Alias" and "Edit Path" options that appear in the menu when you right click a location? |
2. Function, Operation
|
| 2-60 |
In the NetSkate Event Console, notifications for the Koban Alarm "IP Address Change" is increasing. Is there a way to suppress these notifications? |
2. Function, Operation
|
| 2-26 |
In the network map screen, the "Previous" and "Next" buttons at the bottom left are grayed out. Under what circumstances are these buttons used? |
2. Function, Operation
|
| 4-7 |
In the segment being monitored by SwiMon, there is a terminal whose IP address is displayed as "********" and is marked with a yellow diamond-shaped "?" symbol. |
4. Troubleshooting
|
| 3-27 |
Is communication between the Manager and the Console, and between the Manager and the Sensor, encrypted? |
3. Technical information
|
| 2-48 |
Is it acceptable to use the Koban Sensor's "Active Terminal Detection" feature on a segment with a 16 bit netmask? |
2. Function, Operation
|
| 2-12 |
Is it possible to block Windows file sharing (NetBEUI), which does not use IP addresses? |
2. Function, Operation
|
| 1-23 |
Is it possible to change the display names such as "Default Location" or "Default Domain"? |
1. Introduction, Setting
|
| 1-10 |
Is it possible to change the port (9907/TCP) used for send block commands from the NetSkateKoban Manager to the NetSkateKoban Sensor? |
1. Introduction, Setting
|
| 1-30 |
Is it possible to change the port number (1099/TCP) used for RMI communication between the NetSkateKoban Console and the NetSkateKoban Manager? |
1. Introduction, Setting
|
| 1-9 |
Is it possible to change the SNMP Trap port (162/UDP) used for sending alert information from the NetSkateKoban Sensor to the NetSkateKoban Manager? |
1. Introduction, Setting
|